JVC KD-SH77R Service Manual page 6

KD-SH77R/KD-SH55R
Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the top chassis.
1. Remove the three screws G inside the top chassis
and remove the CD mechanisma ssembly.
Removing the motor assembly
Prior to performing the following procedure, remove
the top chassis.
1. Disconnect the wire from connector CN703 on the
main board.
2. Remove the motor bracket and the spring attached
to the arm braket assembly (R).
3. Remove the two screws H
bracket.
4. Remove the washer attaching the clutch assembly
and pull out the clutch assembly from the shaft.
5. Remove the two screws I and the motor assembly
from the motor bracket.
Motor braket
Clutch assembly
Washer
1-6
(See Fig.7)
(See Fig.8 to 10)
attaching the motor
Motor assembly
R
Fig.10
Top chassis
G
CD mechanisma ssembly
Spring
Arm braket assembly (R)
Main board
CN601
G
G
Fig.7
Motor braket
Motor assembly
Fig.8
CN703
H
Motor braket
H
Fig.9