JVC KD-SH77R Service Manual page 10

KD-SH77R/KD-SH55R
4. Remove the screw S attaching the lifter board cover
in the rear of the front bracket.
5. Release the two joints d while pushing the front side.
Move the lifter board cover inthe direction of the
arrow and release the eight joints e.
6. Remove the two screws T attaching the lifter board
on the front of the body.
1-10
Joints e
Lifter board cover
Joint d
S
Joints e
Fig.21
Lifter board
Fig.22
Fig.23
Joints e
Joint d
Joint e
Front bracket
Lifter board cover
T