JVC KD-SH77R Service Manual page 5

3. Remove the three screws B on both sides of the
body.
4. Remove the screw C and the three screws D on the
left side of the body.
5. Remove the two screws E and the screw F on the
back of the body.
6. Move the top chassis upward and remove it with the
CD mechanism assembly. The connector on the CD
mechanism assembly
connector CN601 on the main board.
E
Fig.6 (KD-SH77RE)
is disconnected from
F
B
Fig.4
C
Heat sink
D
Fig.5
E
Fig.6 (KD-SH55RE)
KD-SH77R/KD-SH55R
Top chassis
B
Top chassis
B
F
1-5