Direct Channel Search; Hd Radio™ Control; Source Control Screen - Kenwood DNX9960 Instruction Manual

SIRIUS/XM Control (North American sales area only)

Direct Channel Search

Direct Channel Search
Tuning in by entering the desired channel
number.
1 Display the Source Control Screen
See <Source Control Screen> (page 45).
2 Start Direct Channel Search
3 Enter the channel number
1 1 1
1 Enters the channel number.
[Cancel] Cancels the direct channel
search.
[Clear] Clears the channel number.
4 Tune in the channel
⁄
• The operation ends automatically if you do not
operate within 10 seconds.
48 DNX series DNX9960/ DNX7160/ DNX7020EX
HD Radio™ Control
Various control screens appear in the HD Radio Source mode. (only with the optional
accessory HD Radio tuner connected)

Source Control Screen

Source Control Screen
Switches to the source control screen to
use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
screen
1 1 1
[HD FM] Switches to the HD FM1/2/3
band.
[HD AM] Switches to the HD AM band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[CH ∞], [CH 5] Selects a channel
(program).
2 Display the HD Radio Preset List
Screen. See <Preset Select> (page 51).
1 Information display
Selects the Station Name, Song title,
Artist, Album, or Genre.
"HD FM"/ "HD AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
"HD" Channel display
[ ] When appears, the text display
is scrolled by touching it.
DDX series DDX896/ DDX8046BT
Multi Function
[1/2] Switches the multi function
display.
2 2 2
[ ] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall the stations on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 50) or
<Manual Memory> (page 50).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[DIR]* You can tune by entering the
desired frequency or channel number.
See <Direct Search> (page 52).
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 50).
[RCV] The Receive mode switches in the
following order. See <Receive mode>
(page 51).
[INFO] Displays the tuned program
information.
⁄
• * Only with KTC-HR300 (optional accessory)
connected.
Next page 3
English 49