Receive Mode; Direct Search - Kenwood DNX6960 Instruction Manual

HD Radio" Control
Receive mode
Sets the radio broadcasts receive mode.
D
Display the Source Control Screen
See <Source Control Screen> (page 40).
.II
Display the Receive mode screen
D
Select the receive mode
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
Direct Search
Tuning in by entering the desired frequency or
channel number.
KTC-HR300 (optional accessory) connected only.
I
D
Display the Source Control Screen
See <Source Control Screen> (page 40).
IJ
Start Direct Search
D
Enter the frequency or channel number
OJ
Enters the frequency or channel number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search
[Clear] Clears the frequency or channel
number.
II
Tune in the frequency or channel
42
DNX SERIES DNX6960/DNX6160/DNX6020EXIDNX6460BT/DNX5160