HD Radio™ Control
Auto Memory
Auto Memory
Stores stations with good reception in
memory automatically.
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Select a band you wish to store in
memory
3
Select the Auto Memory mode
4
Start Auto Memory
Auto Memory terminates when 6 stations
are stored or when all stations are tuned
in.
⁄
• The operation ends automatically if you do not
operate within 10 seconds.
50
DNX series DNX9960/ DNX7160/ DNX7020EX
Manual Memory
Manual Memory
Stores the current receiving station in
memory.
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Select a station you wish to store in
memory
3
Store in memory
2 sec.
Continue to touch until the memory
number appears.
Preset Select
Preset Select
Lists and selects memorized channel.
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Display the HD Radio Preset List
Screen
3
Select a station
1
1
1
1 Memorized stations are displayed.
Touch to tune in.
[
] Returns to the Source Control
screen.
DDX series DDX896/ DDX8046BT
Receive mode
Receive mode
Sets the radio broadcasts receive mode.
1
Display the Source Control Screen
See <Source Control Screen> (page 49).
2
Display the Receive mode screen
3
Select the receive mode
[Receive Mode] The Receive mode
switches in the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
Next page 3
Next page 3
English
51