Source Control Screen; Auto Memory; Manual Memory - Kenwood DNX9960 Instruction Manual
Gps navigation system
dnx series; monitor with dvd receiver
ddx series
Hide thumbs
Also See for DNX9960:
- Instruction manual (196 pages) ,
- Gps navigation instruction manual (84 pages) ,
- Installation manual (33 pages)
Table of Contents
Advertisement
TV Watching
Source Control Screen
Source Control Screen
Switches to source control screen to use
various functions.
1
Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2
Operation on the Source Control
Screen
1
1
1
[BAND] Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel
tuning sequence.
2 Display the TV Preset List Screen. See
<Preset Select> (page 44).
[
] Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Preset" Memory Number Display
"ch" Channel display
[
] When
appears, the text display
is scrolled by touching it.
Multi Function
42
DNX series DNX9960/ DNX7160/ DNX7020EX
[1/2] Switches the multi function
display.
[
] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall channels on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 43) or
<Manual Memory> (page 43).
[SEEK] Switches the Seek mode.
2
2
2
The mode is switched in the following
order each time you touch the button.
Display
Setting
"AUTO1"
Tunes in a station with good reception
automatically.
"AUTO2"
Tunes in stations in memory one after
another.
"MANU"
Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 43).
Auto Memory
Auto Memory
Stores stations with good reception in
memory automatically.
1
Display the Source Control Screen
See <Source Control Screen> (page 42).
2
Select a band you wish to store in
memory
3
Select the Auto Memory mode
4
Start Auto Memory
Auto Memory terminates when 6 stations
are stored or when all stations are tuned
in.
⁄
• The operation ends automatically if you do not
operate within 10 seconds.
DDX series DDX896/ DDX8046BT
Manual Memory
Manual Memory
Stores the current receiving channel in
memory.
1
Display the Source Control Screen
See <Source Control Screen> (page 42).
2
Select a station you wish to store in
memory
3
Store in memory
2 sec.
Continue to touch until the memory
number appears.
Next page 3
Next page 3
English
43
Advertisement
Table of Contents
