Wireless Transaction; Using The Smart Card Reader - VeriFone VX 685 Installation Manual

S
ETUP

Using the Smart Card Reader

Removing a Paired
Device via Network
Control Panel of EOS
Wireless
Transaction
Conducsting Wireless
Transactions
Using the Smart
Card Reader
To Use the Smart
Card Reader
CAUTION
34
VX 685/VX 690 I
NSTALLATION
4
The Bluetooth AP Base Station's friendly name will disappear from the display
when the base station is removed.
To remove a paired device via Network Control Panel of EOS:
1
On the Menu, select Bluetooth.
2
On the Bluetooth menu, select Setup.
3
On the Setup menu, select a paired device, then, select Remove.
VX 690 supports wireless transactions.
To conduct wireless transaction:
1
Ensure the terminal is in an optimal position for transmitting.
2
Follow the on-screen instructions provided with your application.
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
1
Position the smart card with the gold contacts facing upward.
2
Insert the card into the smart card reader slot in a smooth, continuous motion
until it sets firmly.
3
Remove the card only when the display indicates the transaction is complete.
Figure 22 Smart Card Reader
Leave the smart card in the card reader until the transaction is completed.
Premature card removal can invalidate a transaction.
G
UIDE