Gprs, And Gps Support; Gps Receiver; 3G/Gprs; Vx 690 Wi-Fi/Bt Support - VeriFone VX 685 Installation Manual

WARNING
3G, GPRS, and
GPS Support

GPS Receiver

3G/GPRS

NOTE
VX 690 Wi-Fi/BT
Support

Bluetooth Support

NOTE
2
Plug the AC power cord into a wall outlet or a power surge protector.
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. Use only a power pack with P/N PWR260-001-XX-A. See
Specifications for detailed power supply specifications.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Also, disconnecting power during a transaction can cause unstored
transaction data files to be lost.
VX 690 uses the Cinterion PHS8-P radio module. This module provides wireless
connectivity using HSPA+ technology. The PHS8-P radio module is optimized for
high bandwidth and allows a downlink speed of 14.4 Mbps and an uplink speed of
5.7 Mbps.
The Cinterion PHS8-P radio module on VX 690 integrates a GPS receiver that
offers the full performance of GPS/A-GPS technology, allowing customers to
implement geo-fencing applications.
Allows for a wider range of communication for wireless transaction payment using
the available operator-provided 3G infrastructure.
VX 685 uses integrated Gemalto BGS2-W module to support GSM/GPRS radio
features.
VX 690 Wi-Fi/BT integrated module uses Broadcomm BCM4330 chip, which
provides SDIO interface for Wi-Fi and UART interface for Bluetooth. The module
includes an integrated WLAN RF transceiver for Wireless LAN systems with
advanced power management unit, and an integrated radio transceiver for
Bluetooth wireless systems.
VX 690 uses the Bluetooth base station. Up to seven devices can be registered
with the same communications device, but only one transaction may be
undertaken at a time. Do not pair more than three terminals with the base station.
When more than three terminals are required, additional base stations must be
suitably positioned on site to obtain maximum radio coverage.
The terminal can only communicate to a base station to which it is paired.
The terminal and the Bluetooth base station are both Class 1 Bluetooth devices
providing secure radio communication up to 100 meters, unobstructed. The
terminal may be registered (paired) with more than one base station. It must be
paired to secure the communication. Using the standard menu options provided in
Verix Commserver, the terminal may easily be switched among paired devices.
3G, GPRS, and GPS Support
VX 685/VX 690 I
NSTALLATION
S
ETUP
29
G
UIDE