Setting The Tray Mode - Xerox VersaLink C505 User Manual

Note
Do not load paper above the maximum fill line. Overfilling the tray can cause the
printer to jam.
4. Push in the tray until it stops.
5. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper
type, size and color.
a) If the paper type, size and color are correct, touch OK.
b) If the paper type, size or color are incorrect, change the settings.
• To select a paper type, touch the current paper type, then from the list, select
the type.
• To select a paper size, touch the current paper size, then from the list, select
the size.
• To select a different paper color, touch the current paper color, then from
the list, select the color.
c) To save the settings, touch OK.

Setting the Tray Mode

Tray Mode determines if you are prompted to confirm or modify paper settings when
you load paper in the tray. Tray Mode defines how the printer behaves when a paper
conflict or mismatch occurs.
To configure the Bypass Tray Mode:
1. At the printer control panel, press the Home button.
2. Touch Device > Paper Trays.
® ®
Xerox VersaLink C505 Multifunction Printer
User Guide
Paper and Media
6-15