JVC TH-L1A Service Manual page 9

3.1.5 Removing the VIDEO 2 BOARD assembly
(See Fig.11, 12)
(1) Disconnect the card wire from VIDEO 2 BOARD assembly
connected to connector
sembly. (See Fig.11)
(2) Remove the two screws K attaching the VIDEO 2 BOARD
assembly. (See Fig.12)
3.1.6 Removing the HEAT SINK
(See Fig.13)
(1) Remove the three screws L attaching the HEAT SINK.
CN905 of the MAIN BOARD as-
CN905
Fig.11
K
K
Fig.12
Fig.13
L
(No.MB623)1-9