JVC TH-L1A Service Manual page 10

3.1.7 Removing the POWER BOARD assembly
(See Fig.14 to 17)
(1) Remove the four screws M attaching the POWER BOARD
assembly. (See Fig.14)
(2) Remove the one screw N attaching the DUMMY BOARD.
(See Fig.15)
(3) Disconnect the connector wires from POWER BOARD as-
sembly connected to connector CN200,
CN202 of the MAIN BOARD assembly. (See Fig.16)
(4) Lift up the POWER BOARD assembly with POWER
CORD, and then disconnect the POWER CORD from con-
nector CN101 of the POWER BOARD assembly. (See
Fig.17)
1-10 (No.MB623)
M
CN201 and
M
M
M
Fig.14
N
Fig.15
CN201
CN202 CN200
Fig.16
CN101
Fig.17