JVC TH-L1A Service Manual page 12

3.1.9 Removing the DSP BOARD assembly
(See Fig.21, 22)
(1) Disconnect the card wire from DSP BOARD assembly con-
nected to connector CN203,
MAIN BOARD assembly. (See Fig.21)
(2) Disconnect the connector wire from DSP BOARD assem-
bly connected to connector
BOARD assembly. (See Fig.21)
(3) Remove the two screws V attaching the DSP BOARD as-
sembly. (See Fig.22)
1-12 (No.MB623)
CN204 and CN206 of the
CN205 and CN320 of the MAIN
CN320 CN205
CN204 CN203 CN206
Fig.21
V
Fig.22
V