Parameters
limit-value: Specifies the maximum number of flow entries, in the range of 1 to 65535.
Examples
# Configure OpenFlow instance 1 to include up to 256 entries in each extensibility flow table.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] flow-entry max-limit 256
flow-table
Use flow-table to configure a flow table for an OpenFlow instance.
Use undo flow-table to restore the default.
Syntax
flow-table { extensibility extensibility-table-id | mac-ip mac-ip-table-id }*
undo flow-table
Default
An OpenFlow instance has an extensibility flow table whose ID is 0.
Views
OpenFlow instance view
Predefined user roles
network-admin
Parameters
extensibility extensibility-table-id: Specifies an extensibility flow table ID in the range of 0 to 254.
mac-ip mac-ip-table-id: Specifies a MAC-IP flow table ID in the range of 0 to 254.
Usage guidelines
You can specify only one MAC-IP flow table and one extensibility flow table for an OpenFlow instance.
For the same OpenFlow instance, the MAC-IP flow table ID must be smaller than the extensibility flow
table ID.
Configure flow tables before you activate an OpenFlow instance.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure a MAC-IP flow table with ID 0 and an extensibility flow table with ID 1 for OpenFlow
instance 1.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] flow-table mac-ip 0 extensibility 1
in-band management vlan
Use in-band management vlan to configure inband management VLANs.
19