HP 5900 series Command Reference Manual page 12

MissRule Flow entry information:
cookie: 0x0, priority: 0, hard time: 0, idle time: 0, flags: none,
byte count: --, packet count: 60
Match information: any
Instruction information:
Write actions:
Drop
Flow entry 1 information:
cookie: 0x0, priority: 0, hard time: 0, idle time: 0, flags: flow_send_rem
|check_overlap, byte count: --, packet count: 1
Match information:
Input interface: XGE1/0/3
Ethernet source MAC address: 0000-0000-0001
Ethernet source MAC address mask: ffff-ffff-ffff
Instruction information:
Set meter: 100
Apply actions:
Output interface: XGE1/0/4
Write actions:
Output interface: Controller, send length: 128 bytes
Table 2 Command output
Field
Table type
flow entry count
total flow entry count
cookie
priority
hard time
idle time
flags
byte count
Description
Type of the flow table: MAC-IP or Extensibility.
Number of flow entries deployed by controllers.
Total number of flow entries in the table.
Cookie ID of the flow entry.
Priority of the flow entry. The larger the value, the higher the priority.
Hard timeout of the flow entry, in seconds. The flow entry is aged out
immediately after the hard timeout expires.
If the flow entry has no hard timeout, the field displays 0.
Idle timeout of the flow entry, in seconds. The flow entry is aged out if no packet
matches the entry within the idle timeout.
If the flow entry has no idle timeout, the field displays 0.
Flags that the flow entry includes:
•
flow_send_rem—Sends a flow removed message when the flow entry is
removed or expires.
•
check_overlap—Checks the flow table for overlapping flow entries.
•
reset_counts—Resets flow table counters.
•
no_pkt_counts—Does not count packets.
•
no_byte_counts—Does not count bytes.
If the flow entry does not include any flags, this field displays none.
Number of bytes that have matched the flow entry.
9