HP 5900 series Command Reference Manual page 13

Field
packet count
Match information
Instruction information
Table 3 Match information
Match field
Input interface
Physical input interface
Ethernet destination MAC
address
Ethernet source MAC
address
Ethernet type
VLAN ID
VLAN PCP
IP DSCP
IP ECN
IP protocol
IPv4 source address
IPv4 destination address
TCP source port
TCP destination port
UDP source port
UDP destination port
ICMPv4 type
ICMPv4 code
ARP source IPv4 address
Description
Number of packets that have matched the flow entry.
Contents in the Match field of the flow entry (see
Contents in the Instruction field of the flow entry:
•
Set meter—Sends the matched packet to a specified meter.
•
Write metadata/mask—Writes the masked metadata value into the
metadata fields of the matched packet. Metadata is used for passing
messages between flow tables.
•
Goto table—Sends the matched packet to the next flow table for processing.
•
Clear actions—Clears all actions in the action set of the matched packet.
•
Apply actions—Applies specified actions in the action set of the matched
packet.
•
Write actions—Writes specified actions into the action set of the matched
packet.
For more information about actions, see
Match field mask
N/A
N/A
Mask
Mask
N/A
Mask
N/A
N/A
N/A
N/A
Mask
Mask
N/A
N/A
N/A
N/A
N/A
N/A
Mask
10
Table
Table 4.
Description
Ingress port (see Table 5).
Ingress physical port.
Ethernet destination MAC address and mask.
Ethernet source MAC address and mask.
Ethernet type of the OpenFlow packet payload.
VLAN ID and mask.
VLAN priority.
DSCP value.
ECN value in the IP header.
IPv4 or IPv6 protocol number.
IPv4 source address and mask.
IPv4 destination address and mask.
TCP source port.
TCP destination port.
UDP source port.
UDP destination port.
ICMPv4 type.
ICMPv4 code.
Sender IPv4 address and mask in the ARP
payload.
3).