Fisher & Paykel WD8560F1 Installation Instructions And User Manual page 37

Keylock
This option enables you to deactivate the buttons on the display panel, except for the
'POWER' and 'Keylock'
To turn 'Keylock' mode ON or OFF when the washer dryer is powered on:
Touch and hold the
● ●
Note: when activated, the light above the
If 'Keylock' mode is activated and the machine is powered off:
To turn your washer dryer on, press the 'POWER' button, then touch and hold the
● ●
button for two seconds. Select your wash cycle, options and then touch
the cycle.
To turn the washer dryer off at anytime when 'Keylock' is activated simply press the
● ●
'POWER' button.
Delay Start
The 'Delay Start' option enables you to delay the start of the wash cycle from between
5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then
hourly up to 12 hours. This can be useful to time your washing or drying to finish when
you arrive home from work, or to start once you have finished in the shower. Some
stain removers also require you to spray them on then leave for several minutes before
washing. Your washer dryer will wait for the selected time then start without you having
to wait or remember to start your machine.
To programme a 'Delay Start' time, simply touch the 'More'
delay time and 'Less'
to confirm your selection and start the countdown. Once started, the time will count
down on the digital display screen in 1 minute increments, the 'Delay Start' light will
flash and the
Note: if you hold the 'More'
after every half a second (more convenient than touching the button repetitively). To
remove a 'Delay Start' time once it is counting down, simply touch
'Less' button to decrease the time to zero. Touch
We suggest that you avoid using 'Delay Start' for damp, non-colourfast items as this
may cause dye run to occur.
Note: for the 'Time Dry' cycle the 'Delay Start'
and decrease the time for a 'Time Dry' cycle. The delay start functionality cannot be
used on a 'Time Dry' cycle.
WASH AND DRY CYCLE OPTIONS
buttons. This prevents accidental button presses.
button for 2 seconds.
button to decrease the time or turn 'Delay Start' off. Touch
light will stop flashing and turn on solid.
button down, the time displayed on the screen will increase
button is illuminated.
button to increase the
to start the cycle immediately.
and buttons are used to increase
to start
, then touch the
35