Table of Contents
Advertisement
Data - Status Screen
Internet
Connection Method
Broadband Modem
Internet Connection
Internet IP Address
"Connection De-
tails"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
Printer
Printer Status
"Abort Current Print
Job" Button
Buttons
Connection Details
This indicates the current connection method, as set in the
Setup Wizard.
This shows the connection status of the modem.
Current connection status:
Active
Idle
Unknown
Failed
If there is an error, you can click the "Connection Details"
button to find out more information.
This IP Address is allocated by the ISP (Internet Service
Provider).
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the
type of connection, a "log" may also be available.
The IP Address of the Broadband Router.
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function - either
"Enabled" or "Disabled".
For additional information about the PCs on your LAN, and
the IP addresses allocated to them, use the PC Database
option on the Advanced menu.
This displays the current name of the Broadband Router.
The current version of the firmware installed in the Broad-
band Router.
This indicates the current status of the printer. Possible
values are:
Idle
Printing
Off-line
Out of paper
Click this button to terminate the current print job. This
button should be used if the current print job is not printing
correctly.
View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method
Operation and Status
39
Advertisement
Table of Contents
