Table of Contents
Advertisement
After press "Apply and Reboot" to apply the configuration and reboot the XRT-D router, you can
now configure other advance sections or start using the router (with the advance settings in
place).
Add PC
Parameters
Client PC Description
Client PC IP Addresses
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button. If you
want to clear the selection and re-select again, just click
"Reset".
Description
The description for this client PC rule.
Enter the IP address range that you wish to apply this
Access Control rule. This is the user's IP address(es)
that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users' IP address and the last user's IP address in the
appropriate boxes. If you want to select only one user
then input the user's IP address in both boxes.
46
Advertisement
Table of Contents
