Table of Contents
Advertisement
In this section you have to select one of many types of connections that you used to connect your
broadband router to your ISP (see screen below).
?
Different ISP's require different methods of connecting, please check with your ISP
for the types required..
Note:
Menu
2.1 Cable Modem
2.2 Fixed-IP xDSL
2.3 PPPoE
2.4 PPTP
2.5 L2TP
2.6 Telstra Big Pond
Click on one of the WAN type and then proceed to the manual's relevant sub-section (2.1, 2.2,
2.3, 2.4, 2.5 or 2.6). Click on Back to return to the previous screen.
Description
Your ISP will automatically give you an IP address.
Your ISP has given you an IP address already.
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Layer 2 Tunneling Protocol is a common connection method used
in xDSL connections.
Telstra Big Pond is an Internet service is provided in Australia.
12
Advertisement
Table of Contents
