Table of Contents
Advertisement
Menu
Quick Setup Wizard (Chapter 2)
General Setup (Chapter 3)
Status Information (Chapter 4)
Tools (Chapter 5)
7) Click on Quick Setup Wizard (see chapter 2) to start configuring settings required so that
you can start accessing the Internet. The other sections (General Setup, Status Information
and Tools) do not need to be configured unless you wish to implement/monitor more advance
features/information.
Select the section (Quick Setup Wizard, General Setup, Status Information and Tools) you wish
to configure and proceed to the corresponding chapter. Use the selections on the web
management's top right hand page to navigate around the web-based management User
Interface.
Description
Select your Internet connection type and then
input the configurations needed to connect to
your Internet Service Provider (ISP).
This section contains configurations for the XRT-
D's advance functions such as: Port Forwarding,
Virtual Server, Access Control, DoS, DMZ,
Special Applications and other functions to meet
your LAN requirements.
In this section you can see XRT-D's system
information, Internet Connection, Device Status,
Security Log and DHCP client Log information.
This section contain XRT-D's Tools - Tools
include Configuration tools, Firmware upgrade
and Reset. Configuration tools allow you to
Backup (save), Restore, or Restore to Factory
Default configuration for your Broadband router.
The Firmware upgrade tool allows you to
upgrade your Broadband router's firmware. The
RESET tool allows you to reset your Broadband
router.
10
Advertisement
Table of Contents
