User Control And Indicators - Optoma EzPro 710 Manual

EzPro710
Service Manual

2.2 User Control and Indicators

There are two ways for you to control the functions: Remote Control and
Panel Control.
Remote Control
Power / Standby
Power the lamp on and off when the main power switch is turned on.
Menu
Press
amoung different menus. To exit OSD, select the " Exit Menu" icon and press
"Enter" button. The projector saves any changes you made automatically.
Source
Press "Source" to choose between video and computer sources.
Reset
When you press "Reset" button, the OSD menus shows message "Reset All
Yes/NO ? ". Select "Yes" to confirm or select " No" to cancel.This function
will
reset all user adjustable parameters to factory default settings.
to open the on-screen display (OSD) menus and to switch
EzPro 710 2-3
Panel Control
Service Manual