Disassemble Engine And Electronic Module - Optoma EzPro 710 Manual

EzPro710
Service Manual

4.5 Disassemble Engine and Electronic Module

1. Unscrew six screws on Left Cover
2. Take off the Cable Tie from cabes
3. Unscrew two screws on the Ballast Module ( for removing engine Module
easily)
4. Remove the Engine and Electronic Module
5. Take off Lens Cover and Focus Adjust Ring.
1
3
EzPro 710 4-4
Engine& Electric Module
4
Lens Cover
(51.81409.001)
Focus Adjust Ring
5
( 51.81410.001 )
2
Cable Tie
Service Manual