Problem
No sound/Noisy sound
Good picture, no sound.
Audio noise.
Menu item is not displayed.
Possible remedies
%
• Press 2 +/– or
(mute) on the remote control.
• Check that the "Speaker" option is set to "On" in the
"Features" menu (page 39).
• Make sure that the antenna is connected using the
supplied coaxial cable.
• Keep the antenna cable away from other connecting
cords.
• Do not use 300-ohm twin lead cables as interference
may occur.
• Communication problems may occur if infrared
communication equipment (e.g. infrared cordless
headphones) is used near the TV. Please use
headphones other than infrared cordless headphones,
move the infrared transceiver away from the TV until
the noise is eliminated, or move the transmitter and
receiver of the infrared communication equipment
closer together.
• Some items cannot be selected depending on the signal
or other settings. Refer to the instructions on each menu
item.
(continued)
Additional Information
67