Table of Contents
Advertisement
Other Functions
Sleep Timer Function
The Sleep Timer function allows you to set the TV to switch itself automatically to the
standby mode after a specified time period. You can select the time period from among 30
minutes, 60 minutes, 90 minutes, and 120 minutes.
To set the Sleep Timer function
Press
on the remote control repeatedly until the desired time period ("30min," "60min,"
"90min," or "120min") appears on the screen.
When the Sleep Timer function is on, the
in red.
To cancel the Sleep Timer function
Press
repeatedly until "Off" appears on the screen.
• If you switch off the TV and switch it on again, the Sleep Timer function is reset to "Off."
• The message "Sleep timer will end soon. Power will be turned off." appears on the
screen 1 minute before the TV switches to the standby mode.
• To check the remaining time in minutes before the TV switches to the standby mode,
press
/
44
Other Functions
/
/
on the remote control when the Sleep Timer function is on.
(Standby/Sleep) indicator on the TV lights up
Advertisement
Table of Contents
