Table of Contents
Advertisement
B)
Label a channel using up to five characters (letters or numbers).
To do this:
1 Press PROG +/– to select the program number with the
channel you want to name.
You cannot select the program number set to skip in the
"Skip" option (see step D below).
2 When the program you want to name appears on the screen,
select the Label option and press
3 Press
/
/
OK.
4 When you have finished, press
word "End" on the screen and press OK to exit the character
input screen.
5 Highlight the Confirm option and press OK. Then press
select OK and finally press OK to store the label.
• If you input a wrong character, select the character using
the screen. Then press
character and press OK.
• For a blank, select
C)
Normally automatic fine-tuning (the Fine option default
setting) will give the best possible picture, however you can
manually fine-tune the TV to obtain a better picture if the
picture is distorted.
To do this:
1 Press PROG +/– to select the program number with the
channel you want to fine-tune manually.
You cannot select the program number set to skip in the
"Skip" option (see step D below).
2 When the program you want to fine-tune appears on the
screen, select the Fine option and press
3 Press
or
to adjust the fine tuning between -15 and +15
and press OK.
4 Highlight the Confirm option and press OK. Then press
select OK and finally press OK to store your choice.
To restore automatic fine tuning, select Auto in step 3 above
D)
Skip any unwanted program numbers when they are selected
with the PROG +/– buttons.
To do this:
1 Highlight the Program option and press
to select the program number you want to skip.
2 When the program you want to skip appears on the screen,
select the Skip option and press
3 Press
or
to select Yes and press OK.
4 Highlight the Confirm option and press OK. Then press
select OK and finally press OK to store your choice.
To cancel this function afterwards, select No instead of Yes in step 3
above.
.
or
to select the first character, then press
/
/
/
or
to select the correct
on the screen and press OK.
.
/
or
to select the
to
or
on
.
to
. Then press
or
to
Menu System
43
Advertisement
Table of Contents
