Table of Contents
Advertisement
Overview of the Remote Control Buttons
Buttons
Selecting channels:
6
a) If the TV is selected:
7
b) If the VCR is selected:
Selecting a screen format:
8
Buttons
Description
Switching the TV
Press this button to temporarily turn off the
1
TV and switch it to the standby mode (the
to the standby
:
mode
lights up in red). Press it again to switch on the
TV from the standby mode.
To save energy, we recommend switching
the TV off completely when the TV is not in
use.
Switching the
Press this button to switch your VCR or
2
DVD on or off.
VCR or DVD on/
off:
Selecting the
With this remote control you can operate not
3
only this TV but also the main functions of
VCR, TV or DVD
your VCR or DVD.
(Media
Switch on the equipment you want to operate
Selector):
and press this button repeatedly to select
VCR, TV, or DVD. The green light just above
the selected equipment lights up
momentarily.
Selecting the
Press this button repeatedly until the input
4
symbol of the desired source appears on
input source:
the screen.
Turning on the
Press this button to set the TV to
5
automatically switch to the standby mode
Sleep Timer
after a specified time period. For more
function:
details, refer to "Sleep Timer Function" on
page 44.
Description
Press this button to select channels.
For double-digit Program numbers, enter the second digit
within 2.5 seconds.
Press this button to watch the last channel selected (the last
channel watched for at least 5 seconds).
For double-digit Program numbers, e.g. 23, press this button
first then press the 2 and 3 buttons.
Press this button repeatedly to change the screen format. For
more details, refer to "Screen Control" on page 36.
/
(Standby/Sleep) indicator on the TV
An initial setup is required to
synchronize this remote control to
your VCR or DVD. This setup
depends on the manufacturer. For
more details, refer to "Remote
Control Configuration for VCR/
DVD" on page 62.
(continued)
23
Overview
Advertisement
Table of Contents
