Table of Contents
Advertisement
Manual Program
Preset
42
Menu System
The "Manual Program Preset" option (A-D) allows you to:
A)
Preset channels, one by one, in the program order of your
choice.
To do this:
1 After selecting this option, press
2 Highlight the Program option and press
3 Press
or
to select a program number for which you want
to preset the channel, then press
preset other options for the channel, press OK instead of
and go to step 8.
4 After selecting the System option, press
5 Press
or
to select the TV Broadcast system (D/K, I, B/G),
then press
. If you do not want to preset other options for the
channel, press OK instead of
6 After selecting the Channel option, press
7 Press the number buttons to enter the channel frequency of the
TV Broadcast directly. If you do not know the channel
frequency, press
When you have tuned to the desired channel, press OK.
If you cannot tune to the desired channel with the above
procedure, try the following procedure:
1
Press OK to exit the Channel option.
2
Select the Tuning mode and press OK or
3
or
Press
4
Follow step 6 above.
5
Press and hold
release it when the desired channel frequency is tuned.
When the Tuning mode is set to Manual, the Fine option
automatically switches to "0." If you change the channel
frequency when the Fine option is not set to "0," the Fine
option automatically switches to "0."
8 Highlight the Confirm option and press OK. Then press
select OK and finally press OK to store your channel selection.
Repeat all the above steps to tune and store other channels.
.
. If you do not want to
and go to step 8.
or
to search for it.
to select Manual, then press OK.
or
(frequency changes sequentially) and
.
.
.
.
to
Advertisement
Table of Contents
