Table of Contents
Advertisement
Picture
Bright
Color
Hue
• Hue can only be adjusted for an NTSC color signal (e.g. U.S.A. video tapes).
• Hue can be adjusted for an input signal from the AV1 or AV2 jack.
• Hue cannot be adjusted for "Memory Stick" input.
Sharp
Sharp cannot be adjusted for "Memory Stick" input.
Backlight
3D NR (Noise
Reduction)
3D NR (Noise Reduction) cannot be adjusted for an input signal from the
Y, P
/C
, P
B
B
R
Dynamic Picture
Dynamic Picture cannot be adjusted for "Memory Stick" input.
Color Tone
Reset
Only "Picture Mode," "Picture," and "Reset" can be adjusted when "Picture Mode" is set
to "Dynamic" or "Standard."
Press
or
to reduce picture contrast.
Press
or
to enhance picture contrast.
Press
or
to darken the picture.
Press
or
to brighten the picture.
Press
or
to decrease color intensity.
Press
or
to increase color intensity.
Press
or
to decrease the green tones.
Press
or
to increase the green tones.
Press
or
to soften the picture.
Press
or
to sharpen the picture.
Press
or
to darken the Backlight.
Press
or
to brighten the Backlight.
Auto/Off
Select to reduce the noise level.
/C
jacks of
3 and "Memory Stick" input.
R
On/Off
Select to enhance the picture contrast.
Cool/Normal/Warm
Select to give bright colors a red tint (Setting is variable from Cool
to Warm).
Cancel/OK
Select OK to reset the picture to the factory preset levels.
33
Menu System
Advertisement
Table of Contents
