Yaesu FT-2980R Operating Manual page 73

40 PSWD
Function: Programs and activates the Password feature.
Available Values: ON / OFF
Default: OFF
41 RESUME
Function: Selects the Scan Resume mode.
Available Values: BUSY / HOLD / 3SEC / 5SEC / 10SEC
Default: BUSY
BUSY:
HOLD:
3SEC/5SEC/10SEC: The scanner will hold for the selected resume time, then resume
42 RF SQL
Function: Adjusts the RF Squelch threshold level.
Available Values: S1 - S9 / OFF
Default: OFF
43 RPT
Function: Sets the Repeater Shift direction.
Available Values: –RPT / + RPT / SIMP
Default: SIMP
44 RVRT
Function: Enables/disables the "Priority Channel Revert" feature.
Available Values: ON / OFF
Default: OFF
45 S SRCH
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE / CNTNUE
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction, starting on
the current frequency. All channels where activity is present (up to 15 in each
direction) are loaded into the Smart Search memories. Whether or not all 31
memories are filled, the search stops after one sweep in each direction.
CNTNUE: The transceiver makes a sweep in each direction as with the "SINGLE"
mode, but if all 31 channels are not filled after the first sweep, the radio con-
tinues sweeping until they are all filled.
46 SHIFT
Function: Sets the magnitude of the Repeater Shift.
Available Values: 0.00 - 99.95 MHz
Default: 0.60 MHz
FT-2980R Operating Manual
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
The scanner will stop when a signal is received, and will not re-
start.
whether or not the other station is still transmitting.
"Set" (Menu) Mode
69