Yaesu FT-2980R Operating Manual page 66

"Set" (Menu) Mode
Menu Item
20 DT SPD Setting of the DTMF Autodialer Sending Speed.
21 EDG.BEP Enables/Disable the Band-edge beeper while scan-
ning.
22 INT CD Selects the Access Number (DTMF digit) for
WiRES™ operation.
23 INT MD Selects the Internet Link Connection mode.
24 INT.A/M Enables/Disables DTMF Autodialer feature while op-
erating on the Internet Connection feature.
25 INT.SET Selects the memory register for an Access Number
(DTMF code) for non-WiRES™ Internet Link System
access.
26 LOCK Selects the Control Locking Lockout combination.
27 MCGAIN Adjust the microphone gain level.
28 MEM.SCN Selects the Memory Scan mode.
29 MW MD Selects the method of selection of channels for Mem-
ory Storage.
30 NM SET Programming an Alpha/Numeric label for a Memory
Channel.
31 OPN.MSG Selects the Opening Message that appears when the
radio is powered on.
32 PAGER Enables/Disables the Enhanced CTCSS Paging &
Code Squelch function.
33 PAG.ABK Enables/Disables the Answer Back function of the
Enhanced CTCSS Paging & Code Squelch function.
34 PAG.CDR Setting the Receiver Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
35 PAG.CDT Setting the Transmitting Pager Code for the En-
hanced CTCSS Paging & Code Squelch function.
36 PRG P1 Programming the function assigned to Microphone's
[P1] key.
37 PRG P2 Programming the function assigned to Microphone's
[P2] key.
38 PRG P3 Programming the function assigned to Microphone's
[P3] key.
39 PRG P4 Programming the function assigned to Microphone's
[P4] key.
40 PSWD Programs and activates the Password feature.
41 RESUME Selects the Scan Resume mode.
42 RF SQL Adjusts the RF Squelch threshold level.
43 RPT Sets the Repeater Shift direction.
44 RVRT Enables/Disables the "Priority Channel Revert" fea-
ture.
45 S SRCH Selects the Smart Search Sweep mode.
46 SHIFT Sets the magnitude of the Repeater Shift.
62
Function Available Values
50 / 100 (ms)
ON / OFF
DTMF 0 - DTMF 9 /
DTMF A -DTMF F
SRG / FRG
MANUAL / AUTO
---
KEY / DIAL / K+D / PTT /
K+P / D+P / ALL
LVL 1 -LVL 9
TAG1 / TAG2 / ALL CH
NEXT / LOWER
---
DC / MSG / OFF
ON / OFF
ON / OFF
---
---
ARTS / DC VLT /
DIMMER / MCGAIN /
SKIP / SQL OFF /
WX CH / S SRCH /
C SRCH / SCAN /
T CALL /
one of the Set Menu
items
---
BUSY / HOLD / 3SEC /
5SEC / 10SEC
S1 - S9 or OFF
-RPT / +RPT / SIMP
ON / OFF
SINGLE / CNTNUE
0.00-99.95 (MHz)
FT-2980R Operating Manual
Default
50 (ms)
OFF
DTMF 1
SRG
MANUAL
---
K+D
LVL 5
ALL CH
NEXT
---
DC
OFF
OFF
05_47
05_47
SQL OFF
S SRCH
C SRCH
USA: WX CH
Asian: T CALL
OFF
BUSY
OFF
SIMP
OFF
SINGLE
0.60 (MHz)