Yaesu FT-2980R Operating Manual page 72

"Set" (Menu) Mode
32 PAGER
Function: Enables/Disables the Enhanced CTCSS Paging & Code Squelch function.
Available Values: ON / OFF
Default: OFF
33 PAG.ABK
Function: Enables/Disables the Answer Back function of the Enhanced CTCSS Paging
& Code Squelch function.
Available Values: ON / OFF
Default: OFF
34 PAG.CDR
Function: Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch function.
See page 25 for details.
35 PAG.CDT
Function: Setting the Transmitting Pager Code for the Enhanced CTCSS Paging &
Code Squelch function.
See page 25 for details.
36 PRG P1
Function: Programming the function assigned to Microphone's [P1] key.
Available Values: ARTS / SQL OFF / WX CH / S SRCH / C SRCH / SCAN / T CALL or
one of the all Set mode items (except Set mode item #36 through 39;
initial setting is "Set mode item #13 DC VLT").
Default: SQL OFF
37 PRG P2
Function: Programming the function assigned to Microphone's [P2] key.
Available Values: ARTS / SQL OFF / WX CH / S SRCH / C SRCH / SCAN / T CALL or
one of the all Set mode items (except Set mode item #36 through 39;
initial setting is "Set mode item #16 DIMMER").
Default: S SRCH
38 PRG P3
Function: Programming the function assigned to Microphone's [P3] key.
Available Values: ARTS / SQL OFF / WX CH / S SRCH / C SRCH / SCAN / T CALL or
one of the all Set mode items (except Set mode item #36 through 39;
initial setting is "Set mode item #27 MCGAIN").
Default: C SRCH
39 PRG P4
Function: Programming the function assigned to Microphone's [P4] key.
Available Values: ARTS / SQL OFF / WX CH / S SRCH / C SRCH / SCAN / T CALL or
one of the all Set mode items (except Set mode item #36 through 39;
initial setting is "Set mode item #47 SKIP").
Default: USA Version: WX CH, Asian Version : T CALL
68 FT-2980R Operating Manual