Introduction; About These Instructions; Text Format Features; Warnings - Siemens SINAMICS G180 Installation And Operating Instructions Manual

Introduction

1.1

About these instructions

These instructions describe the converter and explain how to handle it, from initial delivery to
final disposal of the equipment. Keep these instructions for later use.
Read these instructions before you handle the converter and follow the instructions. The
instructions contain information about the safe handling of the converter as well as its
components and modules. They provide information on assembling, installing, and maintaining
the equipment properly.
If you have suggestions for improving the document, please contact our Service Center.
1.2

Text format features

Text format features
The warning notice system is explained on the rear of the inside front. Always follow the safety
instructions and notices in these instructions.
In addition to the safety-related warning notices which you must read, you will find the text in
these instructions is formatted in the following way:
1. Handling instructions are always formatted as a numbered list. Always perform the steps
● Lists are formatted as bulleted lists.
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
Installation and operating instructions Sinamics G180
Operating Instructions, 05/2013, 4BS0751-001
in the order given.
– Lists on the second level are hyphenated.
1
9