Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000 Quick Installation Manual

802.11n wireless adsl 2/2+ router

Hide thumbs Also See for 802.11n Wireless ADSL 2/2+ Router ADN-4000:

User manual (91 pages)

User manual (118 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the 802.11n Wireless ADSL 2/2+ Router ADN-4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000

Page 1 802.11n Wireless ADSL 2/2+ Router ADN-4000 Quick Installation Guide...
Page 2: Table Of Contents
Table of Contents Package Contents ... 3 Physical Details ... 4 Front Panel LEDs ... 4 Rear Panel ... 5 Rear panel Port and Button Definition ... 5 Installation Procedure ... 6 Configuration ... 8 Preparation ... 8 Using your Web Browser ... 8 Setup Wizard ...
Page 3: Package Contents
Package Contents The following items should be included: ADN-4000 Unit x 1 Quick Installation Guide x 1 User’s Manual CD x 1 Power Adapter x 1 RJ-45 Cable x 1 RJ-11 Cable x 2 Antenna x 3 ADSL Splitter x 1 If any of the above items are damaged or missing, please contact your dealer immediately.
Page 4: Physical Details
Physical Details Front Panel LEDs Status The Router is ready. Wireless LAN is disabled WLAN BLINKING Wireless traffic is transmitting or receiving WPS function is disabled BLINKING WPS function is enabled Connected to an ADSL DSLAN successfully ADSL BLINKING No Connection The LAN cable is connected to the router No Connection LAN1-4...
Page 5: Rear Panel
Rear Panel Rear panel Port and Button Definition Port ● Reboot router: press the reset button for less than 5 seconds, and it will keep your original configurations. ● Load factory default setting: press the reset button Reset for longer than 5 seconds and the router will reset itself to the factory default settings (Warning! your original configurations will be replaced with the factory default settings)
Page 6: Installation Procedure
Installation Procedure 1. Choose an Installation Site Select a suitable place on the network to install the ADN-4000. For best Wireless reception and performance, the ADN- 4000 should be positioned in a central location with minimum obstructions between the ADN-4000 and the PCs.
Page 7 3. Connect ADSL Cable Connect the supplied ADSL cable from to the WAN port on the ADN- 4000 (the RJ-11 connector) to the ADSL terminator provided by your phone company. 4. Power Up Connect the supplied power adapter to the ADN-4000. Use only the power adapter provided.
Page 8: Configuration
Configuration The ADN-4000 contains a HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Preparation Before attempting to configure the ADN-4000, please ensure that: • Your PC can establish a physical connection to the ADN-4000. The PC and the ADN-4000 must be directly connected (using the Hub ports on the ADN-4000) or on the same LAN segment.
Page 9: Setup Wizard
2. A user name and password prompt will appear. The user name and password are both “admin”. Setup Wizard You can use “Setup Wizard” to setup the router as follows, and the router will connect to the Internet via ADSL line. Click “Quick Start”...
Page 10 Step 1 - Click “Next” to begin these four quick steps. Step 2 - Click “Next” to setup your new administrator’s password.
Page 11 Step 3 - Click “Next” to setup your time zone. Step 4 - Click “Next” to setup your Internet connection type. You can have this information from your Internet Service Provider.
Page 12 Step 5 - Enter the connection information provided by your ISP. Step 6 - The Setup Wizard has completed. If you have any change or mistake, click “Back” to modify it, or click “Next” to save the current settings.
Page 13: Home Screen
Step 7 - Saved Changes. Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below.
Page 14: Further Information
Further information If you still have problem on connecting to your ISP, please check the user’s manual on the bundled CD for detail configuration. If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email address: support@planet.com.tw...
Page 15 This page is intentionally left blank...
Page 16 This page is intentionally left blank...