Planet Network Device WAP-4033PE User Manual page 23

Parameter Description
You can select "None","WEP 64bits", "WEP 128bits", "WPA (TKIP)" or "WPA2
Encryption
(AES)" of this option . In default, it is None.
This is only used when you select "WEP 64bits" or "WEP 128bits" encryption
Key Format
method. You may select to select ASCII Characters (alphanumeric format) or
Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. For
example:
ASCII Characters: guest
Hexadecimal Digits: 12345abcde
This is only used when you select "WEP 64bits" or "WEP 128bits" encryption
WEP Key
method. The WEP key is used to encrypt data transmitted between the bridged
access points. Fill the text box by following the rules below.
64-bit WEP: input 10-digit Hex values (in the "A-F", "a-f" and "0-9" range) or 5-digit
ASCII character as the encryption keys.
128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range) or
10-digit ASCII characters as the encryption keys.
Pre-shared Key You may select to select Passphrase (alphanumeric format) or Hexadecimal Digits
Format (in the "A-F", "a-f" and "0-9" range) to be the Pre-shared Key. For example:
Passphrase: iamguest
Hex (64 characters): 12345abcde
Pre-shared Key The Pre-shared key is used to authenticate and encrypt data transmitted between
23