Ips Cli Configuration; System Autoupdate Ips; Ips Global Fail-Open; Ips Global Ip_Protocol - Fortinet Fortigate-5000 series Administration Manual

Intrusion Protection

IPS CLI configuration

system autoupdate ips

ips global fail-open

ips global ip_protocol

ips global socket-size

(config ips anomaly) config limit

FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102
Action Select an action from the dropdown list: Pass, Drop, Reset, Reset Client, Reset
Server, Drop Session, Pass Session, Clear Session. See
descriptions of the actions.
Severity Select a severity level from the dropdown list: Information, Low, Medium, High,
or Critical.
Threshold For the IPS anomalies that include the threshold setting, traffic over the
specified threshold triggers the anomaly.
This section describes the CLI commands that extend features available through the
web-based manager. For complete descriptions and examples of how to enable
additional features through CLI commands, see the
When the IPS is updated, user-modified settings are retained. If recommended IPS
signature settings have not been modified, and the updated settings are different,
signature settings will be set according to accept-recommended-settings.
If for any reason the IPS should cease to function, it will fail open by default. This
means crucial network traffic will not be blocked, and the firewall will continue to
operate while the problem is being resolved.
Save system resources by restricting IPS processing to only those services allowed
by firewall policies.
Set the size of the IPS buffer.
Access the config limit subcommand using the config ips anomaly
<name_str> command. Use this command for session control based on source and
destination network address. This command is available for tcp_src_session,
tcp_dst_session, icmp_src_session, icmp_dst_session,
udp_src_session, udp_dst_session.
IPS CLI configuration
Table 36 for
FortiGate CLI Reference.
359