Configuring An Interface As A Dhcp Relay Agent; Configuring A Dhcp Server - Fortinet Fortigate-5000 series Administration Manual

System DHCP

Configuring an interface as a DHCP relay agent

Configuring a DHCP server

FortiGate Version 3.0 MR4 Administration Guide
01-30004-0203-20070102
Go to System > DHCP > Service and select an edit icon to view or modify the
DHCP relay configuration for an interface.
Figure 59: Edit DHCP relay settings for an interface
Interface Name The name of the interface.
Enable Enable the DHCP relay agent on this interface.
Type Select the type of DHCP service required.
Regular Configure the interface to be a DHCP relay agent for computers on
the network connected to this interface.
IPSEC Configure the interface to be a DHCP relay agent only for remote
VPN clients with an IPSec VPN connection to this interface.
DHCP Server IP Enter the IP address of the DHCP server that will answer DHCP
requests from computers on the network connected to the interface.
Go to System > DHCP > Service to configure a DHCP server on an interface.
Select Add a DHCP Server beside the interface or select Edit beside an existing
DHCP server to change its settings.
Figure 60: DHCP Server options
Configuring DHCP services
115