Cabling; Optional Sata Or Sas Cabling; Standard Sata Cabling; Optional Ata Or Atapi Device Cabling - HP ProLiant ML350 Maintenance And Service Manual

Cabling

In this section

Optional SATA or SAS cabling ................................................................................................................ 53

Standard SATA cabling .......................................................................................................................... 53

Optional ATA or ATAPI device cabling ..................................................................................................... 53

Optional SATA or SAS cabling
Many configurations are possible when SATA or SAS controllers are added. When upgrading the
storage controller, refer to the Quickspecs and the cabling matrix to identify the correct cables
(http://h10010.www1.hp.com/wwpc/pscmisc/vac/us/en/ss/proliant/proliant-ml.html).
Standard SATA cabling
Item
1
2
Optional ATA or ATAPI device cabling
This server includes one IDE cable (the Cable Select Cable) that can connect up to two ATA or ATAPI
devices to the system through the integrated IDE controller. This cable has three clearly labeled
connectors. If only one IDE device is connected to the system, it must be secured to the cable connector
labeled Drive 0. For all IDE devices, set the configuration jumpers to "Cable Select" or "CS."
Description
SATA cable (drives 1-4)
SATA cable (drives 5-8)
Cabling 53