Exit Menu - Planar Clean Screen C3012T User Manual

Exit Menu

The options in this menu allow the user to: save settings and exit, abandon changes and exit to
the system, and control the backup and restoration of CMOS RAM to the FBD.
Figure 22 — Exit menu.
Save Changes & Exit
This option saves the values that have been entered into CMOS and reboots.
Exit Without Saving Changes
This option discards the changes just made and reverts to the state when Setup was entered. The
system reboots with the old values.
Get Default Values
This option resets the Setup values to the original default values set at the factory, before any
suppliers or end users made changes.
Load Previous Values
This option loads the previous values that were in effect before the editing session started.
Save Changes
This option saves the edits made during a session.
Exit & Update BIOS
This option initiates a System BIOS update.
Backup CMOS to Flash
This option immediately saves current Setup settings to CMOS RAM and into FBD main block #1.
Restore CMOS from Flash
This option immediately restores CMOS RAM and updates current Setup settings from FBD
main block #1.
28
Planar Clean Screen PC User's Manual