Page 2
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced,translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission.
Usage Notice Warning - To prevent the risk of fi re or shock hazards, do not expose this product to rain or moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
Introduction About PA1575R The PA1575R Series is All-in-One Touch computer model, it has a 15" fl at panel screen with an active matrix, thin-fi lm transistor (TFT) liquid crystal display (LCD). The TPC-152x ® incorporates the Mobile Intel Atom processor N270 at 1.6GHz, FSB533 and the Mobile Intel 945GSE Express Chipset with the ICH7M.
Start Your Installation Remove the Back Cover Please follow these instructions to remove the cover on the back panel of the LCD so that you can hookup the cables to associated connector. Figure A 1. Remove the stand back cover by pulling in the direction of the arrow. 2.
Kensington Security Slot The computer can be secured to your desk or any other fi xed object with Kensington lock security products. The Kensington lock is not included.
VESA Mount For Your Computer This computer conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defi nes a physical mounting interface for fl at panel computers, and corresponding with the standard mounting devices of fl at panel computer, such as wall and table arms.
User Controls Side Panel Controls Icon Key Name Menu Down Enter Power Menu off status Menu on status Menu appear Menu disappear / return to main item Brightness Main item select up / Adjust up Mute Main item select down / Adjust down Enter/Select sub-item function Power On/Off...
Initial Turn-On The initial setup of the operating system takes approximately 5-10 minutes. Additional time may be needed depending on touch computer hardware confi guration and connected devices. To setup the Windows OS for the touch computer, turn on the touch computer and follow the instructions on the screen.
Page 14
Step 2. Press "Next" Step 3. Read agreement and press " I accept this agreement" and "Next".
Page 15
Step 4. Language Selection, Press "Next" Click Customize. The Regional and Language window shown below will appear. Step 5. Type your full name, organization and press "Next"...
Page 16
Step 6. Type product key and press "Next" Please fi nd the "Certifi cate of Authenticity" license label on the back-cover.
Page 17
Step 7. Setup your computer name, administrator password and press "Next" Step 8. Date and Time Settings, Setup your computer date and time and press "Next"...
Page 18
Step 9. Choose typical or custom setting and press "Next" Step 10. Choose applicable option ▎ ▼...
Page 19
Step 11. Press "Finish" Step 12. Finish and launch windows system...
Test Devices The touch computer can be pre-installed with several different hardware options. To test an optional device that is installed on the touch computer, follow the instructions below. NOTE: Testing icons are located on the desktop. Testing of a particular device can only be done after the device is properly installed.
Recovering the Operating System If the touch computer’s operating system and software needs to be recovered, insert the included recovery disk into an external DVD-ROM (sold separately) and reboot the touch computer. Follow the on-screen instructions to complete recovery. NOTE: All data will be deleted during the recovery process. User must back up fi les prior to recovering the operating system.
Page 22
▎ ▼ Step 4. Press any key to continue ▎ ▼...
Page 23
Step 5. Press any key to continue ▎ ▼ ▎ ▼...
Page 24
Step 6. Press "Next" Step 7. Read agreement and press "I accept this agreement" and "Next".
Page 25
Step 8. Press "Next" Step 9. Type your full name, organization and press "Next"...
Page 26
Step 10. Type product key and press "Next" Please fi nd the "Certifi cate of Authenticity" license label on the back-cover.
Page 27
Step 11. Setup your computer name, administrator password and press "Next" Step 12. Setup your computer date and time and press "Next" Step 13. Choose typical or custom setting and press "Next"...
Page 28
Step 14. Choose applicable option Step 15. Press "Finish" Step 16. Finish and launch windows system...
Insert the included Touchscreen disk into an external DVD-ROM (sold separately) Step 2. Select the monitor size 15” and then model name PA1575R. Step 3. Click on the “Load Driver” button that appears to the right of the model name.
Environmental Specifi cations Temperature Ranges Operating Temperature (Independent of altitude) C to 35 Non-Operating Temperature (Independent of altitude) C to 60 Humidity Operating (non-condensing) 20% to 80% Non-Operating (38.7 C maximum wet bulb temperature) 10% to 90% Altitude Ranges 0 to + 12,000 feet [3,658m]. Operating Equivalent to 14.7 to 10.1 psia.
Touch Computer Specifi cations Processor Intel ATOM processor N270 w/533MHz FSB 2GB DDR2 RAM Northbridge Intel 945GSE Southbridge Intel ICH7-M Video Intel GMA 950 Operating systems Microsoft Windows XP Professional Embedded 7 x USB 2.0 ports (Ext. x 3, Int x 4) 1 x 10/100 BaseT and Gigabit LAN 2 x Serial ports (DB9) COM1, COM2 Ports...
Display Specifi cations Model PA1575RXP LCD Display 15" TFT Active Matrix Panel Display Size 304.1(H) x 228.1(V) mm Pixel Pitch 0.297(H) x 0.297(V) mm Native XGA 1024 x 768 Display Color 16.2 million color Plug & Play DDC 2B Power Supply Specifi cations The touch computer shall be powered by 12VDC from a universal type power supply brick with the following characteristics: Input voltage...
Page 33
Removable base Fanless Other features Touchscreen sealed to bezel and LCD Security lock receptacle May vary Peripheral Options and Upgrades Battery Notice Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. COM1, COM2, Connector(RS232 Mode) Pin # Signal Name...
Page 34
RJ45 LAN connector Pin Defi nition Pin # Signal Name Power Input Pin Defi nition Pin # Signal Name +12V Ground USB Pin Defi nition Pin # Signal Name 1 2 3 4 USB D- USB D+...
Page 35
DVI-D Pin Defi nition Pin # Signal Name DATA 2- DATA 2+ Shield 2/4 DATA 4- DATA 4+ DDC CLOCK DDC DATA VSYNC DATA 1- DATA 1+ SHIELD 1/3 DATA 3- DATA 3+ DDC POWER A GROUND 1 HOT POWER DATA 0- DATA 0+ SHIELD 0/5...
Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. ► Check that all the I/O and power connectors are correctly and well connected described in the "Installation"...
Product Registration and Technical Support Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefi ts of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html.