Accessories On Select Models - Safety 1st onBoard 22 Instruction Manual

C-2 Remove and Install Shell to Base
1.
2.
Failure to securely attach shell to the base can
result in serious injury or death.
13
4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd 15-16 4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd 15-16
To Remove Shell from
Base
From the back of the infant
restraint, pull on the base
release handle to unlock
the shell from the base and
at the same time, lift up
the infant restraint by the
carrying handle.
To Attach Shell to Base
Align notches in the front
of shell with the lock bar
on the base. Push down
firmly to lock into place.
You will hear a "click"
when it is locked. Pull up
on shell to make sure it is
locked into place.
C-3 Accessories on Select Models
Infant Insert
The infant insert is designed to
support the infant's head and
neck. Make sure that the insert
does not cover the infant's face
in any way. Remove the insert
when the infant's head has
reached the top inside part of the
infant insert.
To remove this insert, undo the
fastening strips and slide the
insert out.
Reverse steps to replace insert.
Harness Covers
The harness covers help to
provide comfort to the infant's
neck. For harness covers to fit
correctly you may have to push
the ends of the covers through
the upper harness slots.
There are different harness
cover styles depending on your
model.
To remove the harness covers
with fastening strips, you will
have to undo the fastening
strips and remove harness covers.
To remove harness covers without fastening strips, you
will have to unhook the harness straps from splitter plate,
pull harness straps out of the upper harness slots and
remove harness covers. Rethread harness straps and
re-hook the harness strap loops onto the splitter plate
(see section C-12).
14
11/5/14 10:47 AM 11/5/14 10:47 AM