Accessories On Select Models; Child Restraint And Booster Seat Use - Safety 1st Alpha Omega 65 Instructions Manual

Accessories on Select Models

Head Pillow
The head pillow provides extra comfort for
your child. To remove the pillow, undo the
fastening strip from behind the headrest
and remove the pillow. Reverse to replace
the pillow.
Harness Covers
There are different harness cover styles
depending on your model.
To remove the harness covers with fas-
tening strips, undo the fastening strips and
remove harness covers.
To remove harness covers without
fastening strips, unhook the harness strap
from splitter plate, pull harness strap out
of the upper harness guides and remove
harness covers. Rethread harness strap and
attach the harness strap loops to the splitter
plate. (See page 18.)
Infant Head Support
Infant head support
infant's face in any way. Remove the head
support when the infant's head has reached
the top, inside part of the infant head sup-
port.
To remove the support, undo the fastening
strips and slide the insert out.
Reverse steps to replace support.
Lumbar Support
The lumbar support provides extra comfort
for your child.
To remove the lumbar support, slide out
from behind the harness straps.
19

Child Restraint and Booster Seat Use

Do not use a child restraint or booster seat that has been
in a crash or a collision. The system must be replaced.
Do not use a child restraint or booster seat if you do not
know the history of the restraint.
Never take your child out of the child restraint or booster
seat or attend to the child's needs while the vehicle is
moving.
Never leave child unattended in the child restraint or
booster seat.
To avoid the child being seriously burned, always check for
hot seat and buckles before using this child restraint.
Do not use a child restraint or booster seat with missing or
damaged parts.
Do not lubricate the buckles, harness system or fasteners
for any reason.
DJG does not recommend the use of accessories or add-
ons that have not been certifi ed with this child restraint
and booster seat at original purchase date.
Never allow any child to play with this child restraint and
MUST not cover the
booster seat; it is not a toy.
Do not remove the warning labels.
This child restraint has been certifi ed for use in passenger
vehicles and aircraft. This booster seat has been certifi ed
for use in passenger vehicles only. Do not use in a boat,
on a motorcycle or in a cargo van or bus where there are
no seat belts or tether anchors. Do not modify for use as a
crib or a swing. Do not leave on stove top or any other hot
surface.
On the back of the child restraint there is a date of manu-
facture label. Do not use this child restraint more than 10
years after date of manufacture.
Read all instructions and warning labels for additional
warnings.
20