Table of Contents
Advertisement
Getting started
Quick reference guide - headset base
POWER jack
(green dot)
MICROPHONE/
Press the volume keys on the side
of the headset base to adjust the
speaking volume when on a call
(page 29).
(USB port)
Open the port cover to plug in the USB
cable when in PC mode (page 33).
LIFTER
This jack is only used with an AT&T
handset lifter (model TL7100 or
TL7711, purchased separately).
CORDED HANDSET CONNECTED/
YES/NO
Choose the setting based on whether
you are using a corded handset
(page 8).
CORDED PHONE CONNECTION
This jack (orange dot) is only used
with corded phone interface cable
connecting to the corded telephone.
TEL WALL JACK (red dot)
3
VOLUME
Advertisement
Table of Contents
