AT&T TL7710 User Manual page 25

Getting started
Headset attachments
To attach the ear hook to the headset:
1. Remove any headset attachment (earbud excluded) connected
to the headset earpiece.
2. Insert the earpiece into the ear hook ring as shown in Figure 1.
3. Press the edge of the ear hook ring towards the earpiece until
it clicks into place as shown in Figure 2.
4. Hook the headset onto the desired ear. Adjust the angle of the
headset until the microphone is pointing towards your mouth
as shown in Figure 3.
Figure 1 Figure 2
Figure 3
19