Planar PE191M User Manual page 22

OSD Exit Option
Use the OSD Exit item to close the OSD program.
Note:
1. NO VIDEO
When the monitor is ON and
there is no Video signal
received, the "NO VIDEO"
message will be displayed.
2. Signal out of monitor's supported range (Please refer to Addendum)
When the frequency range is
out of the monitor's
specifications, or the incoming
resolution is higher than
1280x1024.
In this case, the video data will
be turned off and a warning
message "OVER RANGE" will
be displayed.
following submenu options:
LANGUAGE: Use the Adjustment Control buttons to
scroll to the desired OSD display language. The
supported languages are German, English, French,
Spanish, and Italian.
AUDIO-VOLUME: Use the Adjustment Control
buttons to increase or decrease the volume of the LCD
monitor's sound system.
INFORMATION: The Information submenu option is a
display only item that provides information on the
display mode and firmware version.
EXIT: Pressing the Function Enter button exits the
Misc-Control submenu.
Press the Function Enter button, with the OSD Exit
item selected, to exit the OSD program.
The OSD will close by itself if left inactive.
15