Telnet Command: Wl Acl - Draytek Vigor2120n-plus User Manual

T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows the user to configure wireless access control settings.
wl acl enable [ssid1 ssid2 ssid3 ssid4]
wl acl disable [ssid1 ssid2 ssid3 ssid4]
wl acl add [MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del [MAC]
wl acl mode [ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
S y n t a x D e
S y n t a x D e
Parameter
enable [ssid1 ssid2 ssid3
ssid4]
disable [ssid1 ssid2 ssid3
ssid4]
add [MAC] [ssid1 ssid2
ssid3 ssid4] [isolate]
del [MAC]
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
E x a m p l e
E x a m p l e
> > wl acl showmode
ssid1: none
ssid2: none
ssid3: none
ssid4: none
> wl acl add 00-50-70-ff-12-70
Set Done !!
> wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate
Set Done !!
> wl acl show
: w l a c l
: w l a c l
s c r i p t i o n
s c r i p t i o n
Description
It means to enable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to disable the settings for SSID1, SSID2, SSID3 and
SSID4.
It means to associate a MAC address to certain SSID
interfaces' access control settings. The isolate setting will
limit the wireless client's network capabilities to accessing
the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
It means to delete a MAC address entry defined in the access
control list.
It means to set white/black list for each SSID.
It means to show access control status.
It means to show the mode for each SSID.
It means to clean all access control setting.
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
537
Vigor2120 Series User's Guide