Meap Safe Mode - Canon LBP6670dn Series Service Manual

2
Technology > MEAP > Maintenance > MEAP Safe Mode

■ MEAP Safe Mode

● Outline
Use safe mode if you need to start up the system without worrying about extra applications. It
will start up only those system software files (including SMS) that normally start up as default
files while preventing MEAP applications and the like from starting up.
When you have made changes and restart the device, the control panel will indicate 'MPSF'
in its lower right corner. The MEAP applications that may have been active before you shut
down the equipment will not start up on their own. Make use of safe mode when restoring
the system software as when MEAP applications or services cause a fault as the result of a
conflict or wrong sequence of registration/use. You can access to SMS in this condition so
that you can take necessary measures, for example, you can stop application that may cause
the trouble.
If default authentication has been selected, the mode of authentication remains valid;
otherwise, the message "The login service must be set again with SMS" ap pears. Change
the login service as necessary.
● Starting in Safe Mode
To start the device in the MEAP SAFE mode, turn ON the power with the [ Application ] key
and the [ ID ] key pressed.
2 Technology > MEAP > Maintenance > MEAP Safe Mode
● How to cancel MEAP SAFE mode
If you want to cancel MEAP SAFE mode, just restart the device as usual. It will start in normal
mode.
Note:
If accessed to SMS in MEAP SAFE mode, the device started mode is shown on the title
bar of the browser.
When normally started:
Service Management Service : <Device Name>: <Product Name>
When starting in MEAP SAFE mode:
Service Management Service : <Device Name>:<Product Name>: Safe Mode
WARNING :
If the device has been started in the MEAP SAFE mode, all MEAP applications stop
and the status becomes "Installed".
This status remains unchanged even if the MEAP SAFE mode is cancelled and the
device is started again in normal mode. It is therefore necessary to access SMS after
normal startup, and start the MEAP application.
2-56
F-2-125
F-2-126
2-56