3
Disassembly/Assembly > Controller System > Removing the Control Panel Unit
9) Pull 1 harness [1] and 1 flat cable [2] out towards the inside.
10) Remove Engine Controller Board [3].
[1]
3
Disassembly/Assembly > Controller System > Removing the Control Panel Unit
[2]
[3]
F-3-28
Removing the Control Panel Unit
Preparations
1) Remove Left Cover.(Refer to page 3-9)
2) Remove Right Cover.(Refer to page 3-9)
3) Remove Rear Cover Unit.(Refer to page 3-10)
4) Remove Upper Cover Unit.(Refer to page 3-11)
Procedure
1) Disengage harness [2] from guide [1].
[3]
x2
[1]
3-18
[4]
[2]
F-3-29
3-18