Operation; Control Panel - Canon LBP6670dn Series Service Manual

1
Product Description > Operation > Control panel

Operation

Control panel

[1] [2]
[5]
[7]
[8]
[12]
[15]
No. Name
[1] Ready Indicator On The printer is ready to print.
Blinking The printer is preparing to print.
[2] Message Indicator Blinking Aproblem has occurred and printing cannot be performed.
(If the printers Sleep Mode when it is offline, the Message
indicator comes on even when no problem is occuring)
[3] Job Indicator On The printer is receiving data.
Data remains in the printer memory.
Blinking The printer is processing data.
[4] Main Power Indicator On The power of the printer is ON.
1 Product Description > Operation > Control panel
[3] [4]
[6]
[9]
[10]
[11]
[13]
[14]
[17]
[16]
F-1-3
Discription
No. Name
When the printer is online
[5] Status/Cancel Key If pressed when the Job indicator is on or
blinking (When data is being processed or
received), diaplay the job list. Select a job from
the list to cancel the job.
[6] Power Key If [Sleep Mode] is set to a setting other than [Off], the printer enters Sleep
Mode.
[7] Job Key Displays the [Job] menu. You
can print various log list.
[8] Utility Key Display the [Utility Menue]
menu. Prints information
about the printer settings
including the current settings.
[9] Settings Key Displays the [Setup] menu.
[10] OK Key Does not function.
[11] Reset Key Display the [Reset] menu. Performs the printer
reset operation, the print data output, and the
shutdown operation.
[12] Back Key Does not function.
[13] Log In/Out Key The log in screen for using MEAP functions is displayed. Enter the Dept.
ID/PIN and log in to the printer.
[14] Application Key It will transition to the Menu Screen. Whenever the key is pressed, the
Printing Screen switches to → MEAP Application 1 → MEAP Application
2.Meap Application 8 → USB Direct Print → Printing Screen → Menu
T-1-7
Screen
[15] Online Key Switches between online and offline . The printer is online when the
indicator under the key is on and is offline when the indicator is off.
[16] Paper Source On
Indicator
Blinking
[17] Feeder Selection Displays the [Select Feeder] menu. Specify
Key which paper source is used to print between
the paper drawer and multi-purpose tray and
the paper size.
1-5
Function
When the When the menu is
printer is offline displayed
Does not function.
Does not Select the next upper item
function. in the same hierarchy.
When the setting value
is numeric, increase the
value.
Does not Goes back up the
function. previous hierarchy.
Gose down the hierarchy
Gose down the hierarchy
Select the next lower item
in the same hierarchy.
When the setting value
is numeric, reduces the
value.
Goes back up the
previous hierarchy.
A paper source is selected.
Printing cannot be performed because no
paper is loaded.
The paper drawer is not installed.
Does not function.
T-1-8
1-5