Planar LB2650W User Manual page 15

RESOLUTION Resolution notifier activity.
NOTIFIER Factory setting: OFF
Provide information about resolution, H/V frequencies,
Information
and polarity of the input signal.
This OSD informs the user the current signal that is
displayed.
Input Select
This OSD will automatically turn off after 2 seconds or
by pressing the "Exit" key.
This OSD gives a warning when the selected input
signal is not active. After power on or when the input
OSD Warnings
signal become inactive, this warning appears.
NO SIGNAL
No signal OSD shall be shown after around 0.5sec from
video mode detection. This OSD shall be turned off
after 5 seconds automatically, or by "EXIT" key. Then
LB2650W User's Guide
(020-0973-00 Rev. A)
15